This is a link that tells how we will get there - MGs on the Oregon Trail
POSTED JUNE 16, 2013 - THE CAR
Before MG2012 in Dillard, Georgia, had ended, we were already thinking about MG2013 in Corvallis, Oregon. We went back and forth in our decision-making process as another MG Adventure sounded like fun but, gee, it was a long way to go across country again. In February 2013 we finally decided that, yes, we would do it! Now, we had to plan – route to get there, what to see and do, route home, and what family and friends could we visit along the way.
Before MG2012 in Dillard, Georgia, had ended, we were already thinking about MG2013 in Corvallis, Oregon. We went back and forth in our decision-making process as another MG Adventure sounded like fun but, gee, it was a long way to go across country again. In February 2013 we finally decided that, yes, we would do it! Now, we had to plan – route to get there, what to see and do, route home, and what family and friends could we visit along the way.
Then
I learned of a scavenger hunt with our MG!
Oooh weee! I thought maybe we can
combine the scavenger hunt with our trip across America and so the push was on
to plan for MG2013. There are two parts
to the planning. One is mine and the
second is Ron’s. This blog page is about
Ron’s planning.
First,
he knew we needed new tires. The last
time the tires were replaced was for MG2006 in Gatlinburg, Tennessee, and that
was 7 years ago. There’s not too many
miles on the current tires (probably less than 15,000) but for an 8,500+ miles
journey, it is the time, not the mileage, that determines when to change tires
on an MG. So, we got 4 new tires in
April. Next, we needed to replace the
battery as it had been about 8+ years since it was last replaced. Ron’s plan is to have the car as ready and
safe as it can be so that we can enjoy our MG Adventure without too many repair
and maintenance hassles.
A
couple of other minor tweaks were made and some creature comforts were
added. Then to test it all out, we drove
to the Uwharrie Mountain British Car Meet, Saturday, May 1. We arrived okay but Ron wasn’t satisfied with
the engine performance. He was able to
locate the problem while we were driving home.
The car was losing power. We We
made it home okay. The next day, Sunday,
Ron took the engine apart and found a burned valve on the #2 cylinder due to a
flat cam lobe.
| Wonder if Moss has this bit? |
| Valve piece |
So
now we had to rebuild the engine as we had two MG events in the next two
Saturdays, and we needed time after the repair to test drive the car. Wow, talk about deadlines to be met!
| Where do these bits fit? |
| "So," Ron asked Dennis, "where does this go?" |
| Tom, Dennis & Ron - hard at work |
| "The engine goes where?" asked Bill |
| "I tell you it's got to FIT!" |
| It FITS! |
| Almost Done |
The
car was ready to drive in one week to the next car show event May 11 in Wake
Forest. The car only had to be driven 5
miles. All went well but Ron still
needed to put the air rail pump and other bits on the engine. Then the car went to the NCMGCC Annual Car
show May 18. But it was overheating on
the way home. Turned out the thermostat
was stuck so he replaced that. Then
there was an oil leak at the rear of the engine that showed up. Ron talked to his trusted friends for ideas –
huummmm.
The
MG needed more work and had to be ready for June 1 to drive to Petersburg,
Virginia, and Lake Gaston, North Carolina, for a weekend of fun and to take
pictures for the scavenger hunt and, of course, to test all the engine repairs. We put 450 miles on the engine. All went well but the minor oil drip was
persistent. What could it be? Was it the rear seal or something else? Ron continued with the inspections.
Next,
he looked at the brakes. He had planned
to replace them. That project went
well. It had been 9 years since the last
brake replacement and we wanted GOOD brakes for our trip. Boy, we are getting tight on time.
The
car is running great but it still has the minor oil drip. Now we’ve got 4 weeks before we leave for our
MG2013 MG Adventure. So, the engine was
taken out of the car for the third time.
Ron found what he thinks was the cause of the drip – faulty rear seal
- replaced with speedi-sleeve and new upgraded seal. Fixed it, re-installed the engine, and completed
all the engine hook ups. The engine is ready for the trip.
Now
we are ready for the packing.
No comments:
Post a Comment
Ron and Pat would like your comments and feedback!